Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
You might also like
MAKITA Kit 18V MSB4P2A
Hammer MAKITA DHR171
- - Powerful BL motor that provides greater efficiency and performance, reducing engine friction and warming
- - Body divided into two parts reducing vibrations considerably
- - Ergonomic anti-slip grip, the handle fits perfectly in the hand for comfort and control
- - LED light to illuminate the work point in low light areas
- - Tool holder with quick insert SDS-Plus
- - 2 work modes, rotation and rotation with percussion, comfortable and easily accessible change
- - Variable trigger speed with reversible mode
- - Auxiliary handle with adjustable depth stop
Mini-Grinder MAKITA DGA504
- - 18V Mini-Grinder with brushless BL motor, better performance than the previous model (DGA452)
- - Equipped with automatic speed control. Change the cutting speed depending on the work you do :
- + Light work : high speed mode
- + Demanding jobs : high torque mode
- - Anti-restart system that prevents accidental start-up of the tool, thus avoiding possible accidents
- - Soft start that prevents jerking in the start
- - Indicator of the state of the load in 3 stages :
- + 3 lights : more than 50% of the load
- + 2 lights : between 50 and 20% of the load
- + 1 light : less than 20%
- - Battery protection circuit that protects it from damage due to overload, temperature or over discharge
- - XPT technology that protects the tool in outdoor work
- - Suction filters placed in the suction sockets to prevent dirt from entering the tool
Drill Driver MAKITA DDF482
- - New Drill Driver more compact than the previous model (DDF456)
- - Motor with 4 brushes, achieving greater speed and power than previous models
- - New ergonomic design handle
- - 21 tightening torque + drill positions
- - 2 mechanical speeds
- - Self-locking chuck, faster change of accessories with one hand
- - LED on the front that illuminates the work point for greater user vision
- - Ergonomic elastomer coated handle for better grip
Impact Driver MAKITA DTD154
- - 18V Impact Driver with brushless BL motor
- - Three screw speeds : Hard, Medium, and Soft
- - Special “T” mode for self-drilling screws, the speed drops to Medium just when the impact enters, allowing to drill first and then screw continuously
- - Variable speed on the trigger with reversible mode, allows us to regulate screwing speed as required by the work
- - Ergonomic anti-slip grip, covered with elastomer, the handle fits perfectly in the hand for comfort and control
- - Lighter and more compact design with 117 mm length allowing work in places with difficult access
- - LED light to illuminate the work point in low light areas. The LED stays lit a few seconds after the trigger is pressed. It can be deactivated by pressing and holding “T” mode
- Amperage
- 5.0Ah
- Voltage
- 18V
- Battery Number
- 2 Uns.
- Nº Machines
- 4 Uns.
- Machines
- Grinder
Hammer
Impact Driver
Screwdriver - Tool Organiser
- Trolley
MSB4P2A
MAKITA Kit 18V MSB4P2A
Hammer MAKITA DHR171
- Impact energy : 1.2 J
- No load speed : 0 - 680 r.p.m
- Impacts rate : 0 - 4800 i.p.m
- Tool holder : SDS plus
- Drilling capacity - Wood : Ø 13 mm max.
- Drilling capacity - Steel : Ø 10 mm max.
- Drilling capacity - Concrete : Ø 17 mm max.
- Voltage : 18 V
- Weight : 2.8 kg
Mini-Grinder MAKITA DGA504
- No load speed : 8500 r.p.m
- Cut capacity - Maximum : 20 mm
- Cut capacity - Steel : 6 mm
- Disc diameter : Ø 125 mm
- Bore diameter : Ø 22.23 mm
- Voltage: 18 V
- Dimensions (L x W x H) : 362 x 140 x 145 mm
- Weight : 2.5 kg
Drill Driver MAKITA DDF482
- Fastening torque (soft/hard) : 36 / 62 Nm max.
- Torque settings : 21
- No load speed (low/high) : 0 - 600 / 1900 r.p.m
- Drilling capacity - Steel : Ø 13 mm max.
- Drilling capacity - Wood : Ø 38 mm max.
- Chuck capacity : 1.5 - 13.0 mm
- Voltage : 18 V
- Dimensions (L x W x H) : 185 x 79 x 249 mm
- Weight : 1.8 kg
Impact Driver MAKITA DTD154
- Torque : 175 Nm max.
- No load speed : 0 - 1100 / 2100 / 3600 r.p.m
- Impact rate : 0 - 1100 / 2600 / 3800 i.p.m
- Screw capacity - Wood : 22 - 125 mm
- Screw capacity - Standard : M5 - M16
- Screw capacity - HR : M5 - M4
- Screw capacity - Tool : M4 - M8
- Driving shank : 1/4" hexagonal
- Voltage : 18 V
- Weight : 1.5 kg
- Hammer MAKITA DHR171
+ Auxiliary handle
+ Depth stop
- Mini-Grinder MAKITA DGA504
+ Side handle
+ Blade wrench
- Drill Driver MAKITA DDF482
+ Belt hook
- Impact Driver MAKITA DTD154
+ Belt hook
- 2 Batteries 18V 5,0 Ah
- Charger DC18RC
- Trolley LXT600
Customers who bought this product also bought:
Battery tools kits
MAKITA Kit MK1001 (DDF482+ DHR171+ DGA504+ DTD152+ DJV182+ DSS610+...
MK1001
€1,559.00
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
Batteries
Battery MAKITA BL1850 18V 5,0 Ah
Makita
BL1850
€69.00
EAN : 0088381459129
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
1
MAKITA Kit 18V MSB4P2A (DHR171 + DGA504 + DDF482 + DTD154 + 2 x 5,0 Ah + DC18RC + Trolley)
€719.00