MAKITA Kit MPK1810233A (DDF482+DTD154+DHR171+DGA504+DTM50+DSS610+DJV182+ DJR185+DKP180+DML186+ 3x3,0Ah + DC18RC + 2xLXT600)
€1,719.00
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
You might also like
MAKITA Kit MPK1810233A
Drill Driver MAKITA DDF482
- - New Drill Driver more compact than the previous model (DDF456)
- - Motor with 4 brushes, achieving greater speed and power than previous models
- - New ergonomic design handle
- - 21 tightening torque + drill positions
- - 2 mechanical speeds
- - Self-locking chuck, faster change of accessories with one hand
- - LED on the front that illuminates the work point for greater user vision
- - Ergonomic elastomer coated handle for better grip
Impact Driver MAKITA DTD154
- - 18V Impact Driver with brushless BL motor
- - Three screw speeds : Hard, Medium, and Soft
- - Special “T” mode for self-drilling screws, the speed drops to Medium just when the impact enters, allowing to drill first and then screw continuously
- - Variable speed on the trigger with reversible mode, allows us to regulate screwing speed as required by the work
- - Ergonomic anti-slip grip, covered with elastomer, the handle fits perfectly in the hand for comfort and control
- - Lighter and more compact design with 117 mm length allowing work in places with difficult access
- - LED light to illuminate the work point in low light areas. The LED stays lit a few seconds after the trigger is pressed. It can be deactivated by pressing and holding “T” mode
Hammer MAKITA DHR171
- - Powerful BL motor that provides greater efficiency and performance, reducing engine friction and warming
- - Body divided into two parts reducing vibrations considerably
- - Ergonomic anti-slip grip, the handle fits perfectly in the hand for comfort and control
- - LED light to illuminate the work point in low light areas
- - Tool holder with quick insert SDS-Plus
- - 2 work modes, rotation and rotation with percussion, comfortable and easily accessible change
- - Variable trigger speed with reversible mode
- - Auxiliary handle with adjustable depth stop
Mini-Grinder MAKITA DGA504
- - 18V Mini-Grinder with brushless BL motor, better performance than the previous model (DGA452)
- - Equipped with automatic speed control. Change the cutting speed depending on the work you do :
- + Light work : high speed mode
- + Demanding jobs : high torque mode
- - Anti-restart system that prevents accidental start-up of the tool, thus avoiding possible accidents
- - Soft start that prevents jerking in the start
- - Indicator of the state of the load in 3 stages :
- + 3 lights : more than 50% of the load
- + 2 lights : between 50 and 20% of the load
- + 1 light : less than 20%
- - Battery protection circuit that protects it from damage due to overload, temperature or over discharge
- - XPT technology that protects the tool in outdoor work
- - Suction filters placed in the suction sockets to prevent dirt from entering the tool
Multi Tool MAKITA DTM50
- - Highest efficiency: up to 20000 oscillations per minute
- - Soft start and variable speed via dial
- - Optional dust extraction system
- - 12 angle settings for accessories at 30° intervals- from 0° to 360
- - Accepts Makita & Bosch accessories
Circular Saw MAKITA DSS610
- - Light and handy machine with fast cutting progress thanks to the high speed
- - Two-step trigger to turn on the lights without starting the saw
- - Safety lock which protects the user against unexpected start-up
- - Air jet blowing sawdust for better visibility of the cutting line
- - Aluminum base with mark of the cutting line
- - Soft Grip ergonomics for better grip
- - Lighting concentrated on the cutting line by double LED
Jigsaw MAKITA DJV182
- - Brushless motor : less friction
- - Variable speed control
- - "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
- - Adjustable pendulum feed in 4 positions : 3 pendulums + 1 direct
- - Electric brake to prevent damage to the workpiece
- - Switch lock for continuous work
- - Extra long switch to operate the machine with two fingers for comfort
- - Tool-less blade change
- - LED light to illuminate the work point in low light areas
- - Non-slip handle, comfortable grip with greater control, reducing fatigue and pain in the hand
- - Plastic base protector to protect the workpiece against scratches
Reciprocating Saw MAKITA DJR185
- - Comes with a multi position switch (Trigger Switch and Paddle Switch)
- - Various grip position for versatile operations
- - Blade clamp compatible with both
- - Recipro and Jig saw blades
- - LED joblight with pre-glow function
- - Shoe Adjustment Shoe is adjustable by loosening/fastening a screw for comfortable operation.
Planner MAKITA DKP180
- - Non-slip handle, with better ergonomics and more manageable
- - Precise adjustment of the depth by means of knob with scale
- - Support foot on the rear base of the brush
- - V base for simple chamfering
- - Side housing in cast aluminum, for greater stability of the bearings
- - Chip derailleur thanks to its design
LED Torch MAKITA DML186
- - Bright LED illumination
- - 6 High effeciency LED
- - Push button on/off switch
- - Adjustable hand strap with hook and loop fastener
- Amperage
- 3.0Ah
- Voltage
- 18V
- Battery Number
- 3 Uns.
- Nº Machines
- 10 Uns.
- Machines
- Circular Saw
Grinder
Hammer
Impact Driver
Jig Saw
Multi-Cutter
Planer
Sabre Saw
Screwdriver
Torch - Tool Organiser
- Bag
MPK1810233A
MAKITA Kit MPK1810233A
Drill Driver MAKITA DDF482
- Fastening torque (soft/hard) : 36 / 62 Nm max.
- Torque settings : 21
- No load speed (low/high) : 0 - 600 / 1900 r.p.m
- Drilling capacity - Steel : Ø 13 mm max.
- Drilling capacity - Wood : Ø 38 mm max.
- Chuck capacity : 1.5 - 13.0 mm
- Voltage : 18 V
- Dimensions (L x W x H) : 185 x 79 x 249 mm
- Weight : 1.8 kg
Impact Driver MAKITA DTD154
- Torque : 175 Nm max.
- No load speed : 0 - 1100 / 2100 / 3600 r.p.m
- Impact rate : 0 - 1100 / 2600 / 3800 i.p.m
- Screw capacity - Wood : 22 - 125 mm
- Screw capacity - Standard : M5 - M16
- Screw capacity - HR : M5 - M4
- Screw capacity - Tool : M4 - M8
- Driving shank : 1/4" hexagonal
- Voltage : 18 V
- Weight : 1.5 kg
Hammer MAKITA DHR171
- Impact energy : 1.2 J
- No load speed : 0 - 680 r.p.m
- Impacts rate : 0 - 4800 i.p.m
- Tool holder : SDS plus
- Drilling capacity - Wood : Ø 13 mm max.
- Drilling capacity - Steel : Ø 10 mm max.
- Drilling capacity - Concrete : Ø 17 mm max.
- Voltage : 18 V
- Weight : 2.8 kg
Mini-Grinder MAKITA DGA504
- No load speed : 8500 r.p.m
- Cut capacity - Maximum : 20 mm
- Cut capacity - Steel : 6 mm
- Disc diameter : Ø 125 mm
- Bore diameter : Ø 22.23 mm
- Voltage: 18 V
- Dimensions (L x W x H) : 362 x 140 x 145 mm
- Weight : 2.5 kg
Multi Tool MAKITA DTM50
- Oscillations frequency : 6000 - 20000 o.p.m
- Oscillation angle : 3.2°
- Voltage : 18 V
- Weight : 1.8 kg
Circular Saw MAKITA DSS610
- No load speed : 3700 r.p.m
- Depth of cut - 90° : 57 mm max.
- Depth of cut - 45º : 40 mm max.
- Depth of cut - 50° : 36 mm max.
- Blade diameter : Ø 165 mm
- Bore diameter : Ø 20 mm
- Voltage : 18 V
- Weight : 3.5 kg
Jigsaw MAKITA DJV182
- Strokes rate : 800 - 3500 s.p.m
- Stroke Length : 26 mm
- Tilt left / right : 45º
- Cutting capacity at 90º - Wood : 135 mm max.
- Cutting capacity at 90º - Aluminium : 20 mm max.
- Cutting capacity at 90º - Steel : 10 mm max.
- Voltage : 18 V
- Weight : 2.6 kg
Reciprocating Saw MAKITA DJR185
- Strokes rate : 0 - 3000 s.p.m
- Length of stroke : 13 mm
- Cutting capacity - Steel pipe : 50 mm
- Cutting capacity - Wood : 50 mm
- Voltage : 18 V
- Weight : 1.5 kg
Planner MAKITA DKP180
- No load speed: 14000 r.p.m
- Planing width : 82 mm
- Planing depth : 2 mm max.
- Rebate depth : 9 mm max.
- Voltage : 18 V
- Weight : 3.4 kg
LED Torch MAKITA DML186
- Bulb type : LED
- Light output : 500 lm
- Voltage: 18 V
- Dimensions : 151 x 81 x 61 mm
- Weight : 0.3 kg
- Drill Driver MAKITA DDF482
+ Belt hook
- Impact Driver MAKITA DTD154
+ Belt hook
- Hammer MAKITA DHR171
+ Auxiliary handle
+ Depth stop
- Mini-Grinder MAKITA DGA504
+ Side handle
+ Blade wrench
- Multi Tool MAKITA DTM50
+ Hexagonal Wrench
- Circular Saw MAKITA DSS610
+ TCT Saw blade
+ Type 1 Parallel guide
+ Hexagonal wrench
- Jigsaw MAKITA DJV182
+ Suction adapter
- Reciprocating Saw MAKITA DJR185
+ Hexagonal wrench
- Planner MAKITA DKP180
+ Blade Calibrator
+ Type C Parallel guide
+ 9 mm Socket wrench
+ 2 Mini-Blades HM 82 mm
- LED Torch MAKITA DML186
- 3 Batteries 18V 3,0 Ah
- Charger DC18RC
- 2 Trolleys LXT600
Customers who bought this product also bought:
Batteries
Battery MAKITA BL1850 18V 5,0 Ah
Makita
BL1850
€69.00
EAN : 0088381459129
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
Battery tools
Screwdriver MAKITA DFS251Z (Body only)
DFS251Z
€155.00
EAN : 0088381833110
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
Batteries
Battery MAKITA BL1860 18V 6,0 Ah
BL1860B
€76.63
€79.00
EAN : 0088381464123
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
Battery tools
Orbit Sander MAKITA DBO180Z (Body only)
DBO180Z
€91.35
€105.00
EAN : 0088381658584
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
Chargers
Double Charger MAKITA DC18RD
DC18RD
€79.00
EAN : 0088381444033
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
Power Pack
Power Set MAKITA (2 x 18V 5,0 Ah + DC18RC)
PowerSet50RC
€182.00
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
1
MAKITA Kit MPK1810233A (DDF482+DTD154+DHR171+DGA504+DTM50+DSS610+DJV182+ DJR185+DKP180+DML186+ 3x3,0Ah + DC18RC + 2xLXT600)
€1,719.00