MAKITA Kit MK703 (DHR171 + DGA504 + DTD154 + DJR186 + DJV182 + DSS610 + DML802 + 2 x 5,0 Ah + DC18RC + 2 x LXT600)
€1,160.00
Official warranty : 1 year for professional use and 2 years for private use. For more information see our page Guarantee
You might also like
MAKITA Kit MK704
Hammer MAKITA DHR171
- - Powerful BL motor that provides greater efficiency and performance, reducing engine friction and warming
- - Body divided into two parts reducing vibrations considerably
- - Ergonomic anti-slip grip, the handle fits perfectly in the hand for comfort and control
- - LED light to illuminate the work point in low light areas
- - Tool holder with quick insert SDS-Plus
- - 2 work modes, rotation and rotation with percussion, comfortable and easily accessible change
- - Variable trigger speed with reversible mode
- - Auxiliary handle with adjustable depth stop
Mini-Grinder MAKITA DGA504
- - 18V Mini-Grinder with brushless BL motor, better performance than the previous model (DGA452)
- - Equipped with automatic speed control. Change the cutting speed depending on the work you do :
- + Light work : high speed mode
- + Demanding jobs : high torque mode
- - Anti-restart system that prevents accidental start-up of the tool, thus avoiding possible accidents
- - Soft start that prevents jerking in the start
- - Indicator of the state of the load in 3 stages :
- + 3 lights : more than 50% of the load
- + 2 lights : between 50 and 20% of the load
- + 1 light : less than 20%
- - Battery protection circuit that protects it from damage due to overload, temperature or over discharge
- - XPT technology that protects the tool in outdoor work
- - Suction filters placed in the suction sockets to prevent dirt from entering the tool
Impact Driver MAKITA DTD154
- - 18V Impact Driver with brushless BL motor
- - Three screw speeds : Hard, Medium, and Soft
- - Special “T” mode for self-drilling screws, the speed drops to Medium just when the impact enters, allowing to drill first and then screw continuously
- - Variable speed on the trigger with reversible mode, allows us to regulate screwing speed as required by the work
- - Ergonomic anti-slip grip, covered with elastomer, the handle fits perfectly in the hand for comfort and control
- - Lighter and more compact design with 117 mm length allowing work in places with difficult access
- - LED light to illuminate the work point in low light areas. The LED stays lit a few seconds after the trigger is pressed. It can be deactivated by pressing and holding “T” mode
Reciprocating Saw MAKITA DJR186
- - New vertical crankshaft structure for higher performance
- - By having this vertical shape we get a stiffer and more durable mechanism
- - The vertical mechanism minimizes the backlash of the blade, thus achieving less vibration of the machine
- - Two-finger switch : minimizes user fatigue during continuous work
- - Electric brake that stops the blade as soon as the user releases the switch
- - XPT protection : for outdoor applications, protects the tool from adverse conditions of dust and rain
- - Change of blades without tools
Jigsaw MAKITA DJV182
- - Brushless motor : less friction
- - Variable speed control
- - "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
- - Adjustable pendulum feed in 4 positions : 3 pendulums + 1 direct
- - Electric brake to prevent damage to the workpiece
- - Switch lock for continuous work
- - Extra long switch to operate the machine with two fingers for comfort
- - Tool-less blade change
- - LED light to illuminate the work point in low light areas
- - Non-slip handle, comfortable grip with greater control, reducing fatigue and pain in the hand
- - Plastic base protector to protect the workpiece against scratches
Circular Saw MAKITA DSS610
- - Light and handy machine with fast cutting progress thanks to the high speed
- - Two-step trigger to turn on the lights without starting the saw
- - Safety lock which protects the user against unexpected start-up
- - Air jet blowing sawdust for better visibility of the cutting line
- - Aluminum base with mark of the cutting line
- - Soft Grip ergonomics for better grip
- - Lighting concentrated on the cutting line by double LED
LED Torch MAKITA DML802
- - High brightness LED Torch provides 160 lumens for a round and defined light
- - Multi-faceted reflector controls direction and spreads the light emitted by the flashlight
- - Tilting head in 12 positions with stops from 60º - 110º
- - Flashlight with an aluminum head for increased durability
- - Compact and ergonomic design
- - Rubberized grip provides greater comfort at work
- - Compatible with Makita 18V batteries
- Amperage
- 5.0Ah
- Voltage
- 18V
- Battery Number
- 2 Uns.
- Nº Machines
- 7 Uns.
- Machines
- Circular Saw
Grinder
Hammer
Impact Driver
Jig Saw
Sabre Saw
Torch - Tool Organiser
- Trolley
MK703
MAKITA Kit MK703
Hammer MAKITA DHR171
- Impact energy : 1.2 J
- No load speed : 0 - 680 r.p.m
- Impacts rate : 0 - 4800 i.p.m
- Tool holder : SDS plus
- Drilling capacity - Wood : Ø 13 mm max.
- Drilling capacity - Steel : Ø 10 mm max.
- Drilling capacity - Concrete : Ø 17 mm max.
- Voltage : 18 V
- Weight : 2.8 kg
Mini-Grinder MAKITA DGA504
- No load speed : 8500 r.p.m
- Cut capacity - Maximum : 20 mm
- Cut capacity - Steel : 6 mm
- Disc diameter : Ø 125 mm
- Bore diameter : Ø 22.23 mm
- Voltage: 18 V
- Dimensions (L x W x H) : 362 x 140 x 145 mm
- Weight : 2.5 kg
Impact Driver MAKITA DTD154
- Torque : 175 Nm max.
- No load speed : 0 - 1100 / 2100 / 3600 r.p.m
- Impact rate : 0 - 1100 / 2600 / 3800 i.p.m
- Screw capacity - Wood : 22 - 125 mm
- Screw capacity - Standard : M5 - M16
- Screw capacity - HR : M5 - M4
- Screw capacity - Tool : M4 - M8
- Driving shank : 1/4" hexagonal
- Voltage : 18 V
- Weight : 1.5 kg
Reciprocating Saw MAKITA DJR186
- Strokes rate : 0 - 2800 s.p.m
- Length of stroke : 32 mm
- Cutting capacity - Steel pipe : 130 mm max.
- Cutting capacity - Wood : 255 mm max.
- Voltage : 18 V
- Weight : 3.8 kg
Jigsaw MAKITA DJV182
- Strokes rate : 800 - 3500 s.p.m
- Stroke Length : 26 mm
- Tilt left / right : 45º
- Cutting capacity at 90º - Wood : 135 mm max.
- Cutting capacity at 90º - Aluminium : 20 mm max.
- Cutting capacity at 90º - Steel : 10 mm max.
- Voltage : 18 V
- Weight : 2.6 kg
Circular Saw MAKITA DSS610
- No load speed : 3700 r.p.m
- Depth of cut - 90° : 57 mm max.
- Depth of cut - 45º : 40 mm max.
- Depth of cut - 50° : 36 mm max.
- Blade diameter : Ø 165 mm
- Bore diameter : Ø 20 mm
- Voltage : 18 V
- Weight : 3.5 kg
LED Torch MAKITA DML802
- Bulb type : LED
- Number of bulb : 1
- Power per bulb : 3.2 W
- Light output : 160 lm
- Voltage : 18 V
- Weight : 0.65 kg
- Hammer MAKITA DHR171
+ Auxiliary handle
+ Depth stop
- Mini-Grinder MAKITA DGA504
+ Side handle
+ Blade wrench
- Impact Driver MAKITA DTD154
+ Belt hook
- Reciprocating Saw MAKITA DJR186
+ Saw blade for metal - 152 mm 12TPI
+ Saw blade - 152 mm 6TPI
- Jigsaw MAKITA DJV182
+ Suction adapter
- Circular Saw MAKITA DSS610
+ TCT Saw blade
+ Type 1 Parallel guide
+ Hexagonal wrench
- LED Torch MAKITA DML802
+ Belt hook
- 2 Batteries 18V 5,0 Ah
- Charger DC18RC
- 2 Trolleys LXT600
1
MAKITA Kit MK703 (DHR171 + DGA504 + DTD154 + DJR186 + DJV182 + DSS610 + DML802 + 2 x 5,0 Ah + DC18RC + 2 x LXT600)
€1,160.00